Service Hotline: 13823761625

Products

Contact Us

You are here:Home >> Products >> MCU >> Voice chip

Voice chip

TRSP(M)5040A/5041S1

    TRSP(M)5040A series are 4-bits micro-controller which could play 4 channel melody or 4 channel ADPCM with PWM direct drive circuit. PWM resolution is 8/10/12 bits. They includes a low cost, high performance CMOS micro-processor. The clock frequency of this up is typically 8.192 (±3%) MHz. This chip operates over a wide voltage range of 2.0V~5.5V. It contains program ROM (PROM) and data ROM (DROM) inside. 
    The maximum program ROM is 4K words and maximum data ROM size is 120K byte. The maximum working SRAM is (128+2) nibbles. It is provided with total 12 software programmable I/O Ports.
    TRSP(M)5040A General Descriptions/一般说明:
        TRSP(M)5040A系列是4位微控制器,可播放4通道旋律或4通道ADPCM与PWM直接驱动电路。PWM的分辨率为8/10/12位。它们包括一个低成本、高性能的CMOS微处理器。该上升的时钟频率通常为8.192(±3%)MHz。该芯片可在2.0V~5.5V的较宽电压范围内工作。它在内部包含程序ROM(PROM)和数据ROM(DROM)。
        程序ROM的最大大小为4K字,最大数据ROM大小为120K字节。最大工作SRAM为(128+2)缺口。它共提供了12个软件可编程的I/O端口。

        TRSP(M)5040A series are 4-bits micro-controller which could play 4 channel melody or 4 channel ADPCM with PWM direct drive circuit. PWM resolution is 8/10/12 bits. They includes a low cost, high performance CMOS micro-processor. The clock frequency of this up is typically 8.192 (±3%) MHz. This chip operates over a wide voltage range of 2.0V~5.5V. It contains program ROM (PROM) and data ROM (DROM) inside. 
        The maximum program ROM is 4K words and maximum data ROM size is 120K byte. The maximum working SRAM is (128+2) nibbles. It is provided with total 12 software programmable I/O Ports.

    TRSP(M)5040A Features/特性:
    Operating voltage: 2.0V to 5.5V
    MCU Operation frequency: 8.192MHz 
    Memory Size 
        Program ROM size: 4K*12-bits OTP type
        Data ROM size: Maximum 120K*8-bits OTP type
        SRAM size: 128*4 bits
        User register: 2*4 bits
    Wakeup function for power-down mode: 
        HALT mode wakeup source: Port A, Port B and Port E/CE can wake-up from HALT mode to NORMAL mode and executing wake-up sub-routine program. 
    8 input/output pins: Port A and Port B can be defined as input or output port bit by bit. 
    4 input/output ports or 4 input only ports or 4 output only ports “Port CE/E/C” defined by option: 
        If input only ports are employed, Port E defined as input only ports. 
        If output only ports are employed, Port C defined as output only ports. 
        If input/output ports are selected, Port CE defined as input/output ports bit by bit. 
    Four reset condition: 
        Low voltage reset. (LVR = 2.0V) 
        Power on reset. 
        External reset pin. (active low) 
        Watch dog timer overflow. 
    One internal interrupt sources: 
        PWM interrupt. 
    WDT 
        Watch dog timer, can enabled/disabled by option. 
        WDT period is 256*256*16/Fsys. (WDT period is 0.13 sec for system clock=8.192MHz) 
    Audio output: 
        Support PWM or DAC mode by option. 
        Support 8/10/12 bits. 
    Support option set for pull down resistor 1M, 50K or 220K Ohm, reset pin (PB3 or PC3), low voltage reset…etc. 
    Oscillator fuse option ±3%, temperature & voltage compensation. 
    Support security option (1 bit) for read inhibition. 
    Support 16-levels LVD function.

    TRSP(M)5040A Package:
    TRSP(M)5040A Block Diagram:
    TRSP(M)5040A Speaker wakeup structure:
    TRSP(M)5040A Port PCE mode 3 block diagram:

    TRSP(M)5040A The Application Circuit:
    Please submit your basic information and send an email Sales@ChipSourceTek.com , or call us at 13823761625 (the same number as wechat), and we will contact you as soon as possible!

    *

    *

    *

    *

Related products

Baidu
map