Service Hotline: 13823761625

Support

Contact Us

You are here:Home >> Support >> Technology

Technology

Switching power supply for non high-frequency ordinary circuits

Time:2024-02-13 Views:306
    1. The frequency of the ripple voltage and current output by a general rectification, filtering, series (parallel) voltage stabilizing circuit is 100Hz;
    2. This type of direct current with a frequency of 100Hz ripple voltage will cause interference from the 100Hz ripple voltage when applied in high-frequency signal circuits such as videos. For example, two rolling black and white horizontal bars may appear in the TV screen;
    3. So there is a switch regulated power supply;
    4. Switching stabilized power supply:
    4.1) There is an inverter link that converts the rectified and filtered output DC power into high-frequency AC power;
    4.2) Rectify and filter high-frequency AC power into DC power, and the ripple voltage frequency of this DC power is twice that of this "high frequency";
    4.3) With high frequency DC ripple voltage, the TV screen will no longer have two rolling black and white stripes, which is a very important indicator for high-frequency signal circuits;
    5. Our general audio circuit is an audio circuit, and the DC power quality of ordinary rectification and filtering outputs is sufficient, without the need for a switching power supply;
    6. A regular DC motor power supply, the quality of rectified output DC power is sufficient;
    7. If the switching power supply is used for ordinary circuits or equipment, it will reduce usage efficiency and increase costs;











   
      
      
   
   


    Disclaimer: This article is transferred from other platforms and does not represent the views and positions of this site. If there is any infringement or objection, please contact us to delete it. thank you!
    BD手机网页版官方登录入口-半岛彩票官方网站 ChipSourceTek

Baidu
map