NY8B062B is an 8-bit microcontroller with EPROM as memory, except for I/O applications such as home appliances or measurement. The CMOS process provides customers with significant advantages such as low cost, high performance, and high resistance to electromagnetic interference. The NY8B062B core is built on the RISC Reduced instruction set architecture and can be easily edited and controlled, with a total of 55 instructions. Except for a few instructions that require 2 sequences, most instructions can be completed in 1 sequence, allowing users to easily complete different applications with program control.     Therefore, it is ideal for a variety of low and medium memory capacity but complex applications.

    NY8B062B has built-in high precision eleven plus one channel twelve-bit analog-to-digital converter, and high precision voltage comparator, which is sufficient to cope with various analog interface detection and measurement.

    In terms of I/O resources, the NY8B062B has 14 elastic bidirectional I/O pins, each with a separate register controlled as an input or output pin. And each I/O pin has additional program-controlled functions such as pull or pull down resistance or Open-Drain output. In addition, for infrared remote control products, NY8B062B has built-in infrared carrier transmitter with selectable frequency.

    The NY8B062B has four sets of timers, which can be counted on the system frequency as a general timing application or triggered from an external signal. In addition, the NY8B062B provides three sets of 10-bit resolution PWM outputs, and three sets of buzzer outputs can be used to drive motors, leds, or buzzers.

    NY8B062B uses a dual clock mechanism, high speed oscillation or low speed oscillation can be selected respectively internal RC oscillation or external Crystal input. Under the dual-clock mechanism, the NY8B062B can choose a variety of working modes such as Normal mode, Slow mode, Standby mode and sleep mode to save power consumption and extend battery life. And when the microcontroller uses the internal RC high-speed oscillation, the low-speed oscillation can be simultaneously timed using the external precise Crystal. It can maintain high-speed processing while accurately calculating the true time.

    In power-saving modes such as Standby mode and sleep mode, there are a variety of events that can trigger the interrupted wake-up of NY8B062B into Normal mode or Slow mode to deal with emergencies.

    New high frequency oscillator (FHOSC has 11bit for users to adjust, factory preset +/ -1%, users can adjust to +/-0.1%, and output PWM3 to PA2.

    NY8B062B built-in low-speed crystal vibration (32768Hz) capacitor, CL has Disable, 7pF, 9pF, 12.5pF four options to choose, convenient for customers to reduce the external capacitor parts, still can get more accurate PPM value.